Equipment parameters:
1. This machine consists of polishing machine heads (4 groups), turntable, electronic control, automatic wax spraying device, etc.
2. The polishing part has 4 polishing machine heads, and the polishing grinding head can be electrically moved up and down, forward and backward. The movement of the polishing machine is pneumatically controlled.
3. The turntable diameter is φ2400MM, with 5 workstations installed on it, and the turntable operates in an intermittent manner.
4. The control part product PLC plus infinite touch screen is simple to operate and has stable performance.
5. 1 person/machine, about 40-100 seconds to complete a workpiece.
6. Total power: about 81KW, main motor 11KW*4 units, turntable motor 5KW*1, workpiece rotation motor 2.2KW*7 units, compensation motor 0.55kw*12 units.
7. Mechanical dimensions: 6000*6000*2500mm (length*width*height)
8. Total mechanical weight: about 18 tons
9. Polishing wheel speed: 1500-2800 rpm
10. Polishing wheel diameter: 250-500mm
11. Lifting mode: manual, automatic
12. Grinding head independent control mode can be independently controlled
13. 380v three-phase four-wire.
14. In order to reduce the maintenance rate, the electrical cabinet and the host are installed separately.
15. Equipped with multiple emergency stop buttons and leakage protection appliances.
16. The start and stop of 6 grinding heads are independently controlled.
17. The equipment has an automatic waxing device.
18. The automatic compensation of the polishing wheel is time mode, and the compensation size can be adjusted in time units.
Note: The above are design parameters. If there is a conflict with the actual object, the actual object shall prevail.
